Select a tab below to view each item or items
- Arid-X Dri-Air APD-4 Desiccant Plastic Pellet Dryer
Hotronix by Stahls Heat Transfer Cap Press
Chinese Collectible Plates
Game Birds Collectible Plates- Flower & Butterfly Plates
- Calendar Plates
Song Birds & Other Birds Collectible Plates
50 States Collectible Plates
LIKE NEW - $4,850.00
Description:
We are selling one like new DRI-AIR Desiccant Plastic Pellet Dryer. This unit is model APD-4. This dryer has been wired for 230 VAC single phase power but can be connected for 3 phase power. It is micro-computer controlled for temperature and desiccant regeneration and is fully automatic requiring only that you load it and turn it on. This dryer will typically dry 35 pounds per hour. It comes with the complete operating manual.
Dri-Air APD-4 consists of the ARID-X 35, 46-CFM, automatic regenerating, dual desiccant bed dryer and a two-piece, 150 lb. capacity drying hopper, all built on a 25”x39” floor frame.
We purchased this dryer in January of 1999. It has a total of 10 hours of use. This machine is in mint condition - No dings, No damage, it works just like the day we got it. We bought it and dried 100 pounds of nylon pellets and 100 pounds of ABS. (The injection molding equipment we were renting was not maintained well by the company we were renting from and when the molding equipment failed we lost our ability to mold parts.) We now have no need for this beautiful dual bed desiccant dryer and would like to find it a good home.
This DRI-AIR dryer is a dual-bed design which provides a constant supply of dry air to the hopper. While one bed is removing moisture from the air stream, the other bed is regenerated by heating it up to a high temperature. Once the regenerated bed cools down, the air valve switches the air stream and the regenerated bed is used for the process air. The saturated bed is then regenerated for a complete cycle.
The all-stainless hopper has double-wall jacketed and insulated construction and has a 150 pound capacity. The top loading hopper has a front inspection window and door which makes it very convenient to use. The easily removable air spreader cone promotes proper material flow to assure all the material is dried. Because of this design, there is no dried material at the bottom which needs to be fed out before operating.
Shipping:This item weighs 400 pounds crated and measures 48” long by 30” wide by 72” high. Figure approximately $600 additional freight and crating charge for East Coast locations. Shipping could be less for locations closer to the West Coast. Please email your address and we will let you know the shipping cost to your location. We will not charge any additional shipping above actual shipping cost. You can save the shipping cost if you pick it up at our location (Coos Bay, Oregon 97420). If you pick it up at our location - we will help you load it.
We accept payment by personal or business check, cashiers check, money order or PayPal. Personal or business or cashier checks must clear before shipping or pickup.
(shipping depends on location)
Description:
We are selling a brand new, never used Hotronix thermal transfer press.
It was manufactured 03/07. It comes with the 5 extra attachments (for a total of 6).
Hotronix® Cap Auto-opening Mfg Specs:
- UL/ULC/CE approved for electrical safety
- 90° opening for easy cap placement
- Auto open
- 3.5 x 6 Standard lower platen
- 5 additional, optional lower platens
- Easy change feature, when switching platens
- Platinum RDT heat sensor
- Fully digital time and temperature
- Press size 20”L x 9”W x 18”H
- One year parts warranty
- Lifetime warranty on the heater block
Platen Function and Sizes
Youth Platen - 2.5 x 3
Full Size Platen - 4 x 6.5
Low Crown Platen - 2.75 x 6.5
Foam Front Platen - 4 x 8
6 Panel Platen - 3 x 5.75
This machine is a reasonably priced, very rugged, upscale cap press.
Here's why-
First, this press is built like a tank; solid, with a feeling of invincibility.
Second, and perhaps most importantly, is the availability of six different sizes of lower platens (all other cap press that we know about only offer three). If you have never done caps before you probably don't know how critical having the right sized platen is, for efficient, quality production. The importance of having a perfectly fitted lower platen cannot be over-stated. The reason it is so critical is that in the press, you are putting a curved object on top of another curved object. If the radii of the two curves don't match (too large or too small), you will get a “hump” somewhere in the cap front (unfortunately, usually in the middle). At best, this effect makes some caps very difficult to imprint. At worst, some types of caps will be impossible to imprint, without creasing. The extra, optional platen sizes are: Youth – 2.5 x 3, Full – 4 x 6.5, Low Crown – 2.75 x 6.5, Foam Front – 4 x 8 and 6 Panel – 3 x 5.75.
Third, is the innovative hold-down device of the Hotronix® Cap press. Every other cap press has some type of spring-loaded hold-down at the bottom of the press. With this system, the back of the cap is hooked onto the hold-down and then you lift the cap and bring it up, to position it on the lower platen. While the tension is not great, there is enough (especially on small caps) to often cause a bit of a “struggle”, to seat the cap on the platen correctly. The Hotronix® hold-down is so simple. On the Hotronix® press, the cap is put on the lower platen first. The position of the seated cap puts the back of the cap very close to the lower platen support. After positioning the cap, you then push a small lever on the right side of the platen support. This lever pushes a hold-down bar down, inside the cap, and it is secured. Very cool!
Other points of interest:
* The platens are very “quick-change”. Pull one straight up, out of the centering pins and put another in its place.
* The 90° opening means that there is no danger of burning your hands.
* The auto-open feature is very handy.
* The largest lower platen (4x8) is big enough to put most “iron-on” patches on jeans, jackets and shirts.
* Cap presses don't need as much power as a big 16x20 press, but at 500 watts, it is 50 watts more powerful than others.
This press is a winner, which will serve you well, for many years.
Some closing notes: The most important benefit is the large selection of lower platens.
PAYMENT: We accept payment by personal or business check, cashiers check, money order or PayPal. Checks are required to clear before shipping or pickup.
If you have any questions - Please call 1-541-888-5550 and we will respond promptly.
Pao-chai: 1st plate in the Beauties of the Red Mansion series of limited-edition plates by Master Artisan Zhao Huimin - 1985 Imperial Jingdezhen Porcelain. Includes original packaging by The Bradford Exchange and documentation. 8-1/2 inches across.
Yuan-chun: 2nd plate in the Beauties of the Red Mansion series of limited-edition plates by Master Artisan Zhao Huimin - 1986 Imperial Jingdezhen Porcelain. Includes original packaging by The Bradford Exchange and documentation. 8-1/2 inches across.
Hsi-feng: 3rd plate in the Beauties of the Red Mansion series of limited-edition plates by Master Artisan Zhao Huimin - 1986 Imperial Jingdezhen Porcelain. Includes original packaging by The Bradford Exchange and documentation. 8-1/2 inches across.
Hsi-chun: 4th plate in the Beauties of the Red Mansion series of limited-edition plates by Master Artisan Zhao Huimin - 1987 Imperial Jingdezhen Porcelain. Includes original packaging by The Bradford Exchange and documentation. 8-1/2 inches across.
Miao-yu: 5th plate in the Beauties of the Red Mansion series of limited-edition plates by Master Artisan Zhao Huimin - 1987 Imperial Jingdezhen Porcelain. Includes original packaging by The Bradford Exchange and documentation. 8-1/2 inches across.
$30.00 - PHEASANTS IN FLIGHT by Derek Braithwaite 1987 - Official Plate No. C7907 - 1st issue in the collector’s plate series entitled The Braithwaite Game Bird Collection. Crafted in fine English Bone China by Royal Grafton in an edition limited to 150 firing days. Does not include original packaging, but does include documentation. 8-1/2 inches across.
$49.00 - THE LANDING by David Pentz 1986 - Plate No. 16112B - 1st plate in the Wings Upon The Wind collection from Dominion China Ltd. The Landing (Canadian Geese) was issued under the sponsorship of the Canadian Wildlife Federation in an edition limited strictly to 150 firing days. Includes original packaging by The Bradford Exchange and documentation. 8-1/2 inches across.
$36.00 - NESTING by David Pentz 1987 - Plate No. 19504B - 2nd plate in the Wings Upon The Wind collection from Dominion China Ltd. Nesting (Canadian Geese) was issued under the sponsorship of the Canadian Wildlife Federation in an edition limited strictly to 150 firing days. Does not include the original packaging, but does have the documentation. 8-9/16 inches across.
$36.00 - THE FAMILY by David Pentz 1987 - Plate No. 11349D - 4th plate in the Wings Upon The Wind collection from Dominion China Ltd. The Family (Canadian Geese) was issued under the sponsorship of the Canadian Wildlife Federation in an edition limited strictly to 150 firing days. Includes original packaging by The Bradford Exchange and documentation. 8-1/2 inches across.
$40.00 - SOUTHWARD BOUND by David Pentz 1987 - Plate No. 2754F - 5th plate in the Wings Upon The WInd collection from Dominion China Ltd. Southward Bound (Canadian Geese) was issued under the sponsorship of the Canadian Wildlife Federation in an edition limited strictly to 150 firing days. Does not include the original packaging, but does have the documentation. 8-1/2 inches across.
$40.00 - WINTER HOME by David Pentz 1987 - Plate No. 5124F - 6th and final plate in the Wings Upon The Wind collection from Dominion China Ltd. Winter Home (Canadian Geese) was issued under the sponsorship of the Canadian Wildlife Federation in an edition limited strictly to 150 firing days. Includes original packaging by The Bradford Exchange and documentation. 8-1/2 inches across.
$48.00 - THE PINTAIL by Bart Jerner 1986 - Plate No. 1503A - 1st issue in the Living With Nature: Jerner’s Ducks collection sponsored exclusively by The Wildlife Society. Fired to the exacting standards of Knowles in an edition strictly limited to 150 firing days. Does not include original packaging, but does include documentation. 8-9/16 inches across.
$40.00 - THE MALLARD by Bart Jerner 1986 - Plate No. 17384J - 2nd issue in the Living With Nature: Jerner’s Ducks collection sponsored exclusively by The Wildlife Society. Fired to the exacting standards of Knowles in an edition strictly limited to 150 firing days. Includes original packaging by The Bradford Exchange and documentation. 8-1/2 inches across.
$40.00 - THE WOOD DUCK by Bart Jerner 1987 - Plate No. 3608G - 3rd issue in the Living With Nature: Jerner’s Ducks collection sponsored exclusively by The Wildlife Society. Fired to the exacting standards of Knowles in an edition strictly limited to 150 firing days. Includes original packaging by The Bradford Exchange and documentation. 8-1/2 inches across.
$48.00 - THE GREEN-WINGED TEAL by Bart Jerner 1987 - Plate No. 8902B - 4th issue in the Living With Nature: Jerner’s Ducks collection sponsored exclusively by The Wildlife Society. Fired to the exacting standards of Knowles in an edition strictly limited to 150 firing days. Does not include original packaging, but does include documentation. 8-9/16 inches across.
$55.00 - MONARCH BUTTERFLIES by Lena Liu 1988 - No. 17057B - 1st issue in the collector’s plate series entitled On The Gossamer Wings. Sponsored by The Xerces Society. Crafted in Fine China under the hallmark of W.S. George. Edition strictly limited to 150 firing days. Includes original Bradley Exchange packaging, but does include documentation. 8-9/16 inches across.
$46.00 - FRUHLINGSMORGEN (SPRING MORNING) by Ursula Band 1987 - No. 2710B - 1st issue in the Band’s Bouquets of the Seasons series of limited-edition collector’s plates from Hutschenreuther. Clockwise from left: hawthorne, hyacinth, daffodil, crocus, primula, narcissus, camellia, and snowdrop flowers. Edition strictly limited to 150 firing days. Includes original Bradley Exchange packaging and documentation. Made in West Germany. 7-11/16 inches across.
1960 Taylor-Smith-Taylor Pebbleford by Gilmes Oven Proof 8-59 Turquoise. Made in USA. 10-1/8 inches across. Features sailboats near the shore and an old fashioned windmill.
1961 There is no information on the backside of this plate. There is a sickle and hourglass on the front of the plate. 9-3/4 inches across.
1964 There is no information on the backside of this plate. The people on the front of the plate are skiing, swimming, golfing, and hunting. 9-1/4 inches across.
1965 There is a makers mark on the backside of this plate, a painters palette with a big S, Made in USA, with the phrase Warranted 22K. The people on the front of the plate are skiing, swimming, golfing, and hunting. 9 inches across.
$45.00 - TAWNY OWLS by Dick Twinney 1988 - No. A4461 - from the Baby Owls Collection by The Danbury Mint. An edition limited to 14 firing days. Includes styrofoam case but no original packaging or documentation. 8-3/16 inches across.
$75.00 - THE CARDINAL by Kevin Daniel 1985 - No. 11031A - 1st issue in the Encyclopedia Britannica’s Birds of Your Garden collection, the 1st series of limited-edition plates issued under the sponsorship of Encyclopedia Britannica and the first series by artist Kevin Daniel. Issued in an edition limited to 100 firing days. Includes documentation. 8-1/2 inches across.
$XX.00 - THE BALTIMORE ORIOLE by Kevin Daniel 1985 - No. 2897F - 3rd issue in the Encyclopedia Britannica’s Birds of Your Garden collection, the 1st series of limited-edition plates issued under the sponsorship of Encyclopedia Britannica and the first series by artist Kevin Daniel. Issued in an edition limited to 100 firing days. Includes documentation. 8-1/2 inches across.
$42.00 - THE CHICKADEE by Kevin Daniel 1986 - No. 3904J - 4th issue in the Encyclopedia Britannica’s Birds of Your Garden collection, the 1st series of limited-edition plates issued under the sponsorship of Encyclopedia Britannica and the first series by artist Kevin Daniel. Issued in an edition limited to 100 firing days. Includes documentation. 8-1/2 inches across.
$35.00 - THE BLUEBIRD by Kevin Daniel 1986 - No. 11001D - 5th issue in the Encyclopedia Britannica’s Birds of Your Garden collection, the 1st series of limited-edition plates issued under the sponsorship of Encyclopedia Britannica and the first series by artist Kevin Daniel. Issued in an edition limited to 100 firing days. Includes documentation. 8-1/2 inches across.
$38.00 - THE ROBIN by Kevin Daniel 1986 - No. 15229H - 6th issue in the Encyclopedia Britannica’s Birds of Your Garden collection, the 1st series of limited-edition plates issued under the sponsorship of Encyclopedia Britannica and the first series by artist Kevin Daniel. Issued in an edition limited to 100 firing days. Includes documentation. 8-1/2 inches across.
$25.00 - THE HUMMINGBIRD by Kevin Daniel 1986 - No. 10030B - 7th issue in the Encyclopedia Britannica’s Birds of Your Garden collection, the 1st series of limited-edition plates issued under the sponsorship of Encyclopedia Britannica and the first series by artist Kevin Daniel. Issued in an edition limited to 100 firing days. Includes original Bradford Exchange packaging and documentation. 8-1/2 inches across.
$XX.00 - THE GOLDFINCH by Kevin Daniel 1987 - No. 15165E - 8th issue in the Encyclopedia Britannica’s Birds of Your Garden collection, the 1st series of limited-edition plates issued under the sponsorship of Encyclopedia Britannica and the first series by artist Kevin Daniel. Issued in an edition limited to 100 firing days. Includes original Bradford Exchange packaging and documentation. 8-1/2 inches across.
$44.00 - THE DOWNY WOODPECKER by Kevin Daniel 1987 - No. 2219G - 9th issue in the Encyclopedia Britannica’s Birds of Your Garden collection, the 1st series of limited-edition plates issued under the sponsorship of Encyclopedia Britannica and the first series by artist Kevin Daniel. Issued in an edition limited to 100 firing days. Includes original Bradford Exchange packaging and documentation. 8-1/2 inches across.
$45.00 - BLAUMEISE BLUE TITMOUSE (Parus caeruleus) by Ursula Band 1985 - No.3257A - 1st issue in Band’s Songbirds of Europe collection of limited-edition plates. Endorsed by World Wildlife Fund. It is created on true hard-fire porcelain banded in 22 karat gold, and produced by Porzellanfabrik Tirschenreuth in an edition limited to 100 firing days. Includes documentation. 7-11/16 inches across.
$45.00 - SOMMERGOLDHAHNCHEN - FIRECREST (Regulus ignicapillus) by Ursula Band 1986 - No.4252C - 2nd issue in Band’s Songbirds of Europe collection of limited-edition plates. Endorsed by World Wildlife Fund. It is created on true hard-fire porcelain banded in 22 karat gold, and produced by Porzellanfabrik Tirschenreuth in an edition limited to 100 firing days. Includes documentation. 7-11/16 inches across.
$45.00 - KORSIKANISCHER KLEIBER - CORSICAN NUTHATCH (Sitta whiteheadi) by Ursula Band 1986 - No.7916G - 3rd issue in Band’s Songbirds of Europe collection of limited-edition plates. Endorsed by World Wildlife Fund. It is created on true hard-fire porcelain banded in 22 karat gold, and produced by Porzellanfabrik Tirschenreuth in an edition limited to 100 firing days. Includes documentation. 7-3/4 inches across.
$45.00 - PIROL - GOLDEN ORIOLE (Oriolus oriolus) by Ursula Band 1986 - No.9096G - 4th issue in Band’s Songbirds of Europe collection of limited-edition plates. Endorsed by World Wildlife Fund. It is created on true hard-fire porcelain banded in 22 karat gold, and produced by Porzellanfabrik Tirschenreuth in an edition limited to 100 firing days. Includes documentation. 7-3/4 inches across.
$45 - KOHLMEISE - GREAT TIT (Parus major) by Ursula Band 1986 - No.4676E - 5th issue in Band’s Songbirds of Europe collection of limited-edition plates. Endorsed by World Wildlife Fund. It is created on true hard-fire porcelain banded in 22 karat gold, and produced by Porzellanfabrik Tirschenreuth in an edition limited to 100 firing days. Includes documentation. 7-3/4 inches across.
$45 - ROTKEHLCHEN - EUROPEAN ROBIN (Erithacus rubecula) by Ursula Band 1986 - No.2688F - 6th issue in Band’s Songbirds of Europe collection of limited-edition plates. Endorsed by World Wildlife Fund. It is created on true hard-fire porcelain banded in 22 karat gold, and produced by Porzellanfabrik Tirschenreuth in an edition limited to 100 firing days. Includes documentation. 7-3/4 inches across.
$45 - BUCHFINK - CHAFFINCH (Fringilla coelebs) by Ursula Band 1986 - No.9858E - 7th issue in Band’s Songbirds of Europe collection of limited-edition plates. Endorsed by World Wildlife Fund. It is created on true hard-fire porcelain banded in 22 karat gold, and produced by Porzellanfabrik Tirschenreuth in an edition limited to 100 firing days. Includes documentation. 7-3/4 inches across.
$45 - GARTENROTSCHWANZ - COMMON REDSTART (Phoenicurus phoenicurus) by Ursula Band 1986 - No.3244D - 8th issue in Band’s Songbirds of Europe collection of limited-edition plates. Endorsed by World Wildlife Fund. It is created on true hard-fire porcelain banded in 22 karat gold, and produced by Porzellanfabrik Tirschenreuth in an edition limited to 100 firing days. Includes documentation. 7-11/16 inches across.
ARIZONA - Scenes displayed include Mission San Xavier Del Bac, Sacramento Pit, Bisbee, Superstition Mountain and Desert, Petrified Forest, State Capitol, Coolidge Dam, Wonderland of Rocks with Balanced Rock, Donald Duck, and Punch and Judy, and the Painted Desert. 8-1/4 inches across.
CALIFORNIA - Scenes include Golden Gate Bridge, San Francisco Cable Car, Hearst Castle, Balboa Park, San Diego, Knotts Berry Farm, City Hall, Los Angeles, Old Mission San Juan Capistrano, and the Redwood Highway. 10-1/2 inches across.
CALIFORNIA - The outer edge of this plate is gold in color but turned out red in the photograph. Scenes include Golden Gate, Russian Hill, Bowl Games, Palace of Fine Arts, San Francisco, Road Tree, Old Whaling Station Monterrey, Spanish Mission, San Carlos, Borromeo Near Carmel, Mt. Wilson Observatory, the Campanile, Univ Cal Berkeley. 10 inches across.
FLORIDA - Scenes include Daytona Beach, Marine Studios Marineland, Lucky Palm at Silver Springs, Miami Beach, Water Skiing at Cypress Gardens, Jacksonville Beach, and the Weeki Wachee Springs Aqua Ballet. There is a central flamingo and flowers and oranges in the center. There is a plate mark on the back, with Crest-O-Gold, Made in USA, and warranted 22k. 9-1/16 inches across.
HAWAII the 50th STATE - Scenes include Nuuanu Tunnels, Surfing and Canoeing at Waikiki, Diamond Head, Honolulu Harbor, Hula Show, Hula Show, and King Kamehameha. 7-1/4 inches across.
HAWAIIAN ISLANDS - Scenes include Diamond Head and Outrigger Canoe, King Kamehameha, Hula Dancer, Grass Shack, Tiki Ancient Hawaiian Idol, the Lei Seller. 8-3/16 inches across.
IDAHO the GEM STATE - Scenes include Artistry in Snow, Fishing in Idaho, Sun Valley, State Capitol, American Falls, and Skiing in Idaho. 8-1/4 inches across.
ILLINOIS - Scenes include Starved Rock State Park, Chicago, Mississippi Palisades State Park, State Capitol, New _____ State Park The Lincoln Village, Pere Marquette State Park, and Fort Massac State Park. 7-3/8 inches across.
ILLINOIS TOLLWAY - Scenes include Restaurant, Roadway, Prudential Building, Gift Shop, Skyline, Union Station and Oasis in the center. 9 inches across.
MAINE - Scenes include Fort William Henry, Grounded Schooners in Booth Bay Harbor, Surry Church, Portland Headlight, State of Maine, Capitol, Lobster, Pine Cones State Flower, Vacation Land, Lumber Logging, Fishing, and University of Maine. 10-1/4 inches across.
MICHIGAN UPPER PENINSULA Water Wonderland - Scenes include Upper Tahquamenon Falls, Lake of the Clouds, Porcupine Mts, Shipping, Kitch-iti-ki-pi Spring, Mackinac Bridge, Mackinac Island Carriage, the Soo Locks, Fish, Mining Shaft, Deer. 9-1/4 inches across.
MISSOURI - This plate had a chip taken out of the edge on the left side which has been glued. Scenes include Mark Twain Statue, Riverview Park, Univ of Missuouri (misspelled on plate), Hannibal Home, Ralls County Courthouse, Aloe Plaza or Meeting of the Waters, St. Louis, Nathan Boone House, Arcadia Valley, Hurricane Deck Bridge, State Capitol, Jefferson City, Kansas City, William Rockhill Nelson Art Gallery, Pony Express, St. Joseph, and Excelsior Springs. 10-1/4 inches across.
GLACIER NATIONAL PARK MONTANA - Scenes include Lake St. Mary, Logan Pass, Lake McDonald, Trick Falls, Many Glacier, and Going-To-The-Sun Mountain. 9-5/16 inches across.
NEBRASKA THE CORNHUSKER STATE- Scenes include Boys Town Dowd Memorial Chapel, Flour Milling, Meat Packing, State Capitol, Covered Wagon, and Scotts Bluff. 9-1/8 inches across.
NEW MEXICO - Scenes include State Capitol Santa Fe, White Sands National Monument, Pueblo de Taos, Indian Rug Weaver, White’s City at Entrance to Carlsbad Caverns National Park, Rock of Ages Carlsbad Caverns National Park, Lea Lake Bottomless Lakes State Park, Indian War Dancer, the Organ Mountains Las Cruces, Albuquerque. 10-3/16 inches across.
NORTH DAKOTA - Scenes include Buffalo (National Game Reserve), Slant Indian Village, Harvesting Wheat, Sioux Hoop Dance, Lignite Mining, Prairie Rose, Fort McKean, Saddle Industry, Bronco Busting (Rodeo), General Custer, Chief Sitting Bull, Capitol Building, Farming (Hay), and University of North Dakota. 10-1/4 inches across.
OKLAHOMA - Scenes include Wheat and Oil Fields Together, Oklahoma Sooner Wagon Prairie Schooner, Will Rogers’ Memorial, Claremore, Osage Indians with Feather Foot and Costumes, Grand River Dam, State Capitol, American Mistletoe, Chickasaw Capitol, Tishmingo, Grain Elevator, Enid, Oklahoma, Student Union Building, State University, Oklahoma, and Buffalo Herd. 10-3/8 inches across.
OREGON - Scenes include Multnomah Falls, Crater Lake, State Capitol, Bonneville Dam, Mt Thielsen and Diamond Lake, and Mt Hood. There is a triangular sticker on the back with ANCO and made in Japan. 8-3/4 inches across.
OREGON THE BEAVER STATE - Scenes include Oregon Grape, Mount Hood, Cow, Timber, State Capitol, and Western Meadowlark. There is a plate mark on the back, with a pallette S, Made in USA, and warranted 22k. 10-3/16 inches across.
TURN AROUND - SEASIDE OREGON - Scenes include Haystack Rock, Astor Column, Lighthouse, Oregon Coast, Fort Clatsop, and Harbor Seal at Aquarium. 10-1/4 inches across.
SEATTLE WASHINGTON
SOUTH DAKOTA - Scenes include Mt Rushmore, Campanile South Dakota State College Brookings, Vampire Peak, Badlands National Monument, Corn Palace Mitchell, State Capitol, Pierre, and Missouri Valley Development. 7-1/8 inches across.
WYOMING - Scenes include Ayres Natural Bridge, Hells Half Acre, Devil’s Tower, State Capitol, Cheyenne, Old Faithful, Yellowstone Park, and Jenny Lake in Grand Tetons. Two sizes: 9-1/4 inches across and 10 inches across.
INDIAN PAINTBRUSH STATE FLOWER OF WYOMING - 9-3/16 inches across.
YELLOWSTONE - Scenes include Yellowstone Hotel “Old Faithful”, Deer and Hot Springs, Lower Falls, The Needle, Morning Glory Pool, Snow Plane-Mobile, Elk Herd - Winter, Old Faithful Geyser, Bison and Cactus, Cleopatra’s Terrace Mamouth Hot Springs, and Feeding the Bears. 10 inches across.
